Price List



Online calculations and data bases:

 PID   Program   Price   Calculator 
OP-001 ASME II Material Tables
0.20€  per Minute 
 ×  =  0.00 € 
OP-003 Rectangular piping attachments nach ASME Case N-318-5
10.00€  per Calculation 
 ×  =  0.00 € 
OP-004 Calculation of the stresses in an even pipeline system according to calculation description in Walter Wagners "Pipeline Technnology" (Basic-Version)
10.00€  per Calculation 
 ×  =  0.00 € 
OP-005 Calculation of the stresses in the interface of two tube materials with different thermal expansion coefficients and elasticity moduli
5.00€  per Calculation 
 ×  =  0.00 € 
OP-006 Displacements and rotations of the header
10.00€  per Calculation 
 ×  =  0.00 € 
OP-007 Stress analysis for thin cylindrical shells
5.00€  per Calculation 
 ×  =  0.00 € 
OP-008 Calculation of the stresses in an even pipeline system according to calculation description in Walter Wagners "Pipeline Technnology" (Pro-Version)
20.00€  per Calculation 
 ×  =  0.00 € 
OP-009 Stresses and forces in an axial-symmetrical vertical vessel acc. to BS PD5500
250.00€  per Calculation 
 ×  =  0.00 € 
OP-010 Creep and plastic ratcheting Simplified estimation of the hold backs of the creep and plastic ratchting of pipes
10.00€  per Calculation 
 ×  =  0.00 € 
OP-011 Creeping of a thin walled cylinder under inside pressure and axial load (Basic-Version)
10.00€  per Calculation 
 ×  =  0.00 € 
OP-012 Material data base (A)
0.20€  per Minute 
 ×  =  0.00 € 
OP-013 Creeping of a thin walled cylinder under inside pressure and axial load (Pro-Version)
20.00€  per Calculation 
 ×  =  0.00 € 
OP-014 Hollow circular piping attachments nach ASME Case N-392-3
10.00€  per Calculation 
 ×  =  0.00 € 
OP-015 Calculaton of the tubesheet properties and transient thermal stresses
10.00€  per Calculation 
 ×  =  0.00 € 
OP-016 Material data base (R)
0.20€  per Minute 
 ×  =  0.00 € 
OP-017 Calculation of the stresses in a cylindrical shell according to PD 5500:2003, Annex B (Basic-Version)
30.00€  per Calculation 
 ×  =  0.00 € 
OP-018 Calculation of the stresses in a cylindrical shell according to PD 5500:2003, Annex B (Pro-Version)
50.00€  per Calculation 
 ×  =  0.00 € 
OP-019 Heat loss through the house walls under consideration of convection and thermal radiation
10.00€  per Calculation 
 ×  =  0.00 € 
OP-020 Calculation of equivalent stress ranges according to von Mises and Tresca theories
30.00€  per Calculation 
 ×  =  0.00 € 
OP-021 Stresses in a circular formed flat plate according to S.Schwaigerers ''Festigkeitsberechnung im Dampfkessel-, Behälter- und Rohrleitungsbau''
10.00€  per Calculation 
 ×  =  0.00 € 
OP-022 Stresses in a circular formed flat plate according to S.Schwaigerers ''Festigkeitsberechnung im Dampfkessel-, Behälter- und Rohrleitungsbau''
20.00€  per Calculation 
 ×  =  0.00 € 
OP-023 Stresses in circular hoops according to Roak R.J. "Formulas for stress"
10.00€  per Calculation 
 ×  =  0.00 € 
OP-024 Stresses in circular hoops according to Roak R.J. "Formulas for stress"
20.00€  per Calculation 
 ×  =  0.00 € 
OP-025 Approximation of the graphic presented curve with a polynom, an exponential function etc.
10.00€  per Calculation 
 ×  =  0.00 € 
OP-026 Temperature distribution in multilayer hollow cylinders under consideration of convection and heat radiation
10.00€  per Calculation 
 ×  =  0.00 € 
OP-027 Stresses in long multilayer hollow cylinders under consideration of pressure, convection and heat radiation
20.00€  per Calculation 
 ×  =  0.00 € 
OP-028 Allowable spacing of supports for steel pipes according to EN 13480-3
10.00€  per Calculation 
 ×  =  0.00 € 
OP-029 Calculaton of the tubesheet properties and transient thermal stresses
75.00€  per Calculation 
 ×  =  0.00 € 
OP-030 Moments of flat areas (vector version)
10.00€  per Calculation 
 ×  =  0.00 € 
OP-031 Stresses in ellipsoidal heads due to internal pressure in acc. with Dennis R.Moss´s "Pressure Vessel Design Manual"
5.00€  per Calculation 
 ×  =  0.00 € 
OP-032 Stresses in membrane walls according to german norm stress analysis
20.00€  per Calculation 
 ×  =  0.00 € 
OP-033 Decreaseing of tube wall thickness through corrosion depending on the temperature
10.00€  per Calculation 
 ×  =  0.00 € 
OP-034 Creeping of a tube under dead weight, pressure and axial load in acc. to Odqvist's invariants theory
10.00€  per Calculation 
 ×  =  0.00 € 
OP-035 Calculation of thermal sleeve
30.00€  per Calculation 
 ×  =  0.00 € 
OP-036 Life time analysis acc. to ASME 2004 III-1 NH-3220 for base metal without weldments, long-time service at elevated temperature
10.00€  per Calculation 
 ×  =  0.00 € 
OP-037 Piping komponents under external pressure acc. to EN 13480/13445, AD 2000 B6 and PD 5500 3.6 for cylidrical pipes
10.00€  per Calculation 
 ×  =  0.00 € 
OP-038 Converting of ROHR2 UNI-Files to table form
10.00€  per Calculation 
 ×  =  0.00 € 
OP-039 Shell vessel foundation loadings calculation Forces and moments in an axial symmetrical vertical shell vessel
30.00€  per Calculation 
 ×  =  0.00 € 
OP-041 Fatigue analysis acc. to ASME 2001 VIII-2 App. 5 of a cylinder loaded with inside/outside pressure and thermal stresses
20.00€  per Calculation 
 ×  =  0.00 € 
OP-042 Cone with junctions to cylinders under inside pressure and outer machanical loads acc. to PD5500:2003 Appendix B
75.00€  per Calculation 
 ×  =  0.00 € 
OP-046 Stresses in tubes with shear forces considered
20.00€  per Calculation 
 ×  =  0.00 € 
OP-047 Moments of flat areas (raster version)
5.00€  per Calculation 
 ×  =  0.00 € 
OP-048 Calculation of the reduction piece according to EN 13480-3:2002 (D), edition 1 (2002-05)
5.00€  per Calculation 
 ×  =  0.00 € 
OP-049 Unstayed flat plates and heads according to AD 2000-Merkblatt B5
5.00€  per Calculation 
 ×  =  0.00 € 
OP-050 Lifting lugs on apparatuses for mounting according to DIN 28085 (February 1994)
5.00€  per Calculation 
 ×  =  0.00 € 
OP-051 Calculation of eyelets (in accordance with DIN 28086, November 1977)
5.00€  per Calculation 
 ×  =  0.00 € 
OP-052 Eyelets for mounting vessels and apparatuses (in accordance with DIN 28086, November 1977)
5.00€  per Calculation 
 ×  =  0.00 € 
OP-053 Calculation of mean temperature of a tubesheet
5.00€  per Calculation 
 ×  =  0.00 € 
OP-054 Creep-fatigue damage evaluation according to ASME 2004 Section III Division 1 - NH, Article T-1431 (d)
5.00€  per Calculation 
 ×  =  0.00 € 
OP-055 Simplified elasto–plastic fatigue analysis according to KTA-rules (KTA 3211.2)
5.00€  per Calculation 
 ×  =  0.00 € 
OP-056 Analysis for cyclic loading according to ASME 2001 Section VIII Division 2 Appendix 5
5.00€  per Calculation 
 ×  =  0.00 € 
OP-057 Fatigue analysis acc. to EN 12952-3 and TRD 301 App.1 for cylindrical components with opening
25.00€  per Calculation 
 ×  =  0.00 € 
OP-058 Analysis for cyclic loading according to EN 13445-3
5.00€  per Calculation 
 ×  =  0.00 € 
OP-059 Analysis for cyclic loading according to AD 2000-Merkblatt S2 (October 2004)
5.00€  per Calculation 
 ×  =  0.00 € 
OP-060 Geometrical properties of nozzle
10.00€  per Calculation 
 ×  =  0.00 € 
OP-061 Calculation of buckling strength after Euler according to AD 2000-Merkblatt B5 (Edition 01.2002)
5.00€  per Calculation 
 ×  =  0.00 € 
OP-062 Weld neck forged flange ANSI B16.5 150 Class 150
5.00€  per Calculation 
 ×  =  0.00 € 
OP-063 Calculation of anchors in accordance with "VdTÜV, VGB and FDBR Vereinbarung Dampfkessel 2003/1"
5.00€  per Calculation 
 ×  =  0.00 € 
OP-064 Rectangular tubes subject inside pressure and external forces according to TRD 320 and EN 12952-3 § 9.3
10.00€  per Calculation 
 ×  =  0.00 € 
OP-065 Pipe bends under internal pressure according to ASME B31.3, API-530, TRD-301 und EN 12952-3
5.00€  per Calculation 
 ×  =  0.00 € 
OP-066 Circular plate with non-reinforced or edge-reinforced hole according to Draft DIN 3840
5.00€  per Calculation 
 ×  =  0.00 € 
OP-067 Calculation of tightening torques and bolt forces according to Roloff/Matek "Maschinenelemente"
5.00€  per Calculation 
 ×  =  0.00 € 
OP-068 Stresses and bending in the header calculated according to beam theory
175.00€  per Calculation 
 ×  =  0.00 € 
OP-069 Calculation of heater tube thickness according to API standard 530
10.00€  per Calculation 
 ×  =  0.00 € 
OP-070 Stress analysis for pressure piping / process piping according to ASME B31.3 and FDBR-Guideline
10.00€  per Calculation 
 ×  =  0.00 € 
OP-071 Stresses at beams and welded joints according to Halbehauer/Bodenstein "Maschinenelemente", Springer 1996
10.00€  per Calculation 
 ×  =  0.00 € 
OP-072 Displcements of nozzles due to thermal expansion of vessel shell
10.00€  per Calculation 
 ×  =  0.00 € 
OP-073 Calculation of thicknesses of return bends and elbows according to API standard 530
5.00€  per Calculation 
 ×  =  0.00 € 
OP-074 Stresses and bending in the circular header calculated according to beam theory
10.00€  per Calculation 
 ×  =  0.00 € 
OP-075 Calculation of creep relaxation of stresses in flange bolts
30.00€  per Calculation 
 ×  =  0.00 € 
OP-076 Calculation of gusset stays in accordance with EN 12953-3
20.00€  per Calculation 
 ×  =  0.00 € 
OP-077 Thermal stresses in heat exchangers with rigid tubesheets according to AD-2000 Merkblatt S3/7
5.00€  per Calculation 
 ×  =  0.00 € 
OP-078 Local stress analysis of nozzle flange by rating comparation after ASME B16.5/B16.47
5.00€  per Calculation 
 ×  =  0.00 € 
OP-079 Transformation of forces and moments to different coordinate system
10.00€  per Calculation 
 ×  =  0.00 € 
OP-080 Analysis for cyclic loading according to 2013 ASME Section VIII Division 2 Part 5
10.00€  per Calculation 
 ×  =  0.00 € 
OP-081 Calculation of critical length of engagement for metric ISO threads according to VDI 2230
5.00€  per Calculation 
 ×  =  0.00 € 
OP-082 Assessment of general and local metal loss in cylindrical shells according to API 579 Fitness-For-Service Part 4
5.00€  per Calculation 
 ×  =  0.00 € 
OP-083 Minimum required weld thickness of the tube-to-tubesheet joints acc. to AD 2000 B5
5.00€  per Calculation 
 ×  =  0.00 € 
OP-084 Nozzle
5.00€  per Calculation 
 ×  =  0.00 € 
OP-085 Local thin areas according to ASME VIII-1
10.00€  per Calculation 
 ×  =  0.00 € 
OP-086 Stresses in an axial-symmetrical vertical vessel acc. to BS PD5500 (predefined section forces and moments)
5.00€  per Calculation 
 ×  =  0.00 € 
OP-087 Fatigue analysis acc. to TRD 301 App.1 for cylindrical components
70.00€  per Calculation 
 ×  =  0.00 € 
OP-088 Creep damage analysis acc. to TRD 508 App.1 for cylindrical components
50.00€  per Calculation 
 ×  =  0.00 € 
OP-089 Cracks in cylindrical vessels and pipes or tubes, evaluation of stress intensity factors
10.00€  per Calculation 
 ×  =  0.00 € 
OP-090 Minimum required wall thickness of tubes for fabrication of bends evaluated in accordance with ASME B31.3
10.00€  per Calculation 
 ×  =  0.00 € 
OP-091 Dimensions of tubes to be used for fabrication of specified bends with inside and outside corrosion and fabrication tolerance considered
5.00€  per Calculation 
 ×  =  0.00 € 
OP-092 Dimensions of bends fabricated from specified tubes with inside and outside corrosion and fabrication tolerance considered
5.00€  per Calculation 
 ×  =  0.00 € 
OP-093 Cylindrical shells under external pressure in accordance with BS PD 5500 Chapter 3.6, Annex M and Enquiry Case 5500/33
30.00€  per Calculation 
 ×  =  0.00 € 
OP-094 Elastic characteristics of tubesheets in accordance with 2013 ASME BPVC Section VIII Division 2
5.00€  per Calculation 
 ×  =  0.00 € 
OP-095 Calculation of required flange bolt loads considering additional piping loads
5.00€  per Calculation 
 ×  =  0.00 € 
OP-096 Calculation of required gasket values considering additional piping loads
5.00€  per Calculation 
 ×  =  0.00 € 
OP-097 Analysis of oscillation behavior of swinging flap considering linear damping
20.00€  per Calculation 
 ×  =  0.00 € 
OP-098 Cylindrical shells under external pressure according to 2015 ASME BPVC VIII-2 § 4.4 or Code Case 2286
10.00€  per Calculation 
 ×  =  0.00 € 
OP-099 Cylindrical shells under external pressure according to 2015 ASME Section VIII Division 1 Code Case 2682
10.00€  per Calculation 
 ×  =  0.00 € 
OP-100 Heat transfer coefficient in pipes by turbulent pipe flow in smooth pipes
20.00€  per Calculation 
 ×  =  0.00 € 
OP-101 Forces and moments in the beams of the catalyst basket support
20.00€  per Calculation 
 ×  =  0.00 € 
OP-102 Stresses in supporting lugs in accordance with AD-2000 Merkblatt S 3/4
20.00€  per Calculation 
 ×  =  0.00 € 
OP-103 Rectangular flange with narrow face gasket according to BS PD 5500 Enquiry Case 5500/133
20.00€  per Calculation 
 ×  =  0.00 € 
OP-104 Bolted flange connections with ring type gaskets according to 2015 ASME BPVC Section VIII Division 1 Appendix 2
20.00€  per Calculation 
 ×  =  0.00 € 
OP-105 Cylindrical shells under external pressure according to 2015 ASME BPVC Section VIII Division 1 Parts UG-28/UG-29
20.00€  per Calculation 
 ×  =  0.00 € 
OP-106 Stiffening ring for domed lining subject to weight and pressure loads
10.00€  per Calculation 
 ×  =  0.00 € 
OP-107 Tightening torques for special gaskets
10.00€  per Calculation 
 ×  =  0.00 € 
OP-108 Buckling of cylindrical skirts supporting vessels according to DASt-Directive 013
10.00€  per Calculation 
 ×  =  0.00 € 
OP-109 Anchor bolts and bolt forces according to AD 2000 Merkblatt S 3/0
10.00€  per Calculation 
 ×  =  0.00 € 
OP-110 Ratcheting assessment — simplified elastic-plastic analysis acc. to 2015 ASME BPVC Section VIII Division 2 § 5.5.6.2/5.5.6.3
10.00€  per Calculation 
 ×  =  0.00 € 
OP-111 Estimation of stresses in the gasket base ring weld subject to internal pressure and external loads
5.00€  per Calculation 
 ×  =  0.00 € 
OP-112 Increasing of stresses at closed tubesheet holes
20.00€  per Calculation 
 ×  =  0.00 € 
OP-116 Stresses at beams and welded joints (Extended Edition) according to Halbehauer/Bodenstein "Maschinenelemente", Springer 1996
10.00€  per Calculation 
 ×  =  0.00 € 
OP-155 Lifting lugs according to DIN 28085
5.00€  per Calculation 
 ×  =  0.00 € 
OP-160 Calculation of tightening torques and bolt forces according to ASME PCC-1 Appendix J
5.00€  per Calculation 
 ×  =  0.00 € 
OP-162 Calculation of thermal sleeve nozzle-to-tube weld
10.00€  per Calculation 
 ×  =  0.00 € 
OP-163 Maximum permissible longitudinal compressive stress for tubes according to EN 13445-3 § 13.9
5.00€  per Calculation 
 ×  =  0.00 € 
OP-164 Local stress analysis of nozzle flange by rating comparation after EN 1092-1
5.00€  per Calculation 
 ×  =  0.00 € 
Total: 0.00 €  
For further informaton please read our User Agreement.


©  Lau Engineering Solutions GmbH